Tank Vent Bricks
The Tank Vent Brick is designed as a terminal for vent lines from storage tanks when the line is run inside the building walls.
Overview
The Tank Vent Brick is designed as a terminal for vent lines from storage tanks when the line is run inside the building walls. Such lines are hidden from view and must be protected from damage or vandalism in a manner which does not infringe upon property lines. The face of the Tank Vent Brick is the same 2 1/8" x 8" x 3" measurement as a standard masonry brick and blends into all types of wall construction.The Tank Vent Bricks are made of a one-piece aluminum casting, weigh three pounds and are available with screwed connections to accept either 2" or 3" pipe.Features
- Made Of A One Piece Aluminum Casting
- Available With Screwed Connections To Accept Either 2" or 3" Pipe
- Approved By The New York City Board Of Standards And Appeals
Specification
Fuel oil vent line shall terminate in a one-piece, cast aluminum Tank Vent Brick, which is to be an integral part of the outer face of the building wall. Tank Vent Brick shall be furnished by Preferred Utilities Mfg. Corp., Danbury, CT.
DOCUMENTS & DOWNLOADS
| Tank Vent Brick - Catalog Cutsheet Tank Vent Brick - Datasheet.pdf |
RELATED PRODUCTS
- Anti Syphon Valves
- Back Pressure Regulating Valves, Model BQ
- Back Pressure Regulating Valves, Model V
- Breather Caps
- Double Poppet Foot Valves
- Duplex Oil Strainers
- Foot Valve Extractor Fitting
- Fusomatic Electric Cut-Off Switch
- Fusomatic Globe / Gate Valves
- Ground Level Spill Containers
- Horizontal Spill Containers
- Oil Lever Gate Valves
- Oil Thermometer
- Overfill Prevention Valves
- Relief Valves
- Sidewalk Boxes
- Simplex Oil Strainers
- Single Poppet Foot Valves
- Storage Tank Monitor Access Manhole
- Tank Selector Valves
- Vacuum Breaker Valves
- Vent Protectors
- Watertight Flush Fill Caps
- Watertight Locking Fill Caps
- Fire Safety Gas Shut-off Valves
- Pressure Reducing Valves
- Sidewalk Spill Container
