Pump and Day Tank Set
Features
- Integrated Pump Set and Day Tank
- Automatic Lead/Lag
- Supply and/or Return Pump Combinations
- Microprocessor-based Monitoring and Control
The Fuel Oil Transfer Pump and Day Tank package offers a quick and economical fuel pumping solution and provides a local supply of distillate or diesel fuel for boilers, emergency generators or other stationary engine driven or oil fired equipment.
Integrated Pump Set and Day Tank
- No. 2 or No. 4 Fuel Oil
- Flows from 120 to 1600 GPH
- Integrated Pump Set and Day Tank helps reduce installation cost and occupied floor space
- Industrial type Cast Iron Internal Gear Pumps
Automatic Lead/Lag
- Automatic start on “Call for Operation”
- Lead pump manual selection or automatic alternation
- Automatic lag pump back-up based on day tank level and lead pump thermal overload trip
Supply and/or Return Pump Combinations
- Return pump is applied when day tank is located below the storage tank and gravity overflow is not possible
- Supply pump is applied when day tank is located above the fuel oil storage tank and will generate less than 15" WC priming suction
- Up to two (2) simplex pumps or one duplex pump set
Microprocessor-based Monitoring and Control
- Visual and audible alarms for day tank “High” or “Low” levels, day tank “Leak” and pump failure
- Safety shutdown for “High” level switch, day tank rupture basin leak detection
Power: Fluid: Pump: Motors: |
120 Vac (external) No. 2 or No. 4 Fuel Oil is standard. Consult factory for other fuel types Positive displacement type with cast iron housings and self-adjusting mechanical seals Base mounted, TEFC |
Standard Equipment
- Microprocessor-based control with message display and keypad
- Magnetic motor starters with overload protection
- Motor circuit breakers
- Control circuit transformer (if required)
- Alarm bell with alarm silence / reset pushbutton
- “Hand-Off-Auto” switches
- “Power On” indicator
- Pump & motor assemblies, drop tube and pump connector
- Day Tank Assembly with level probe
For complete system, please specify:
- Select Day Tank Size (Click here for Day Tank Ordering Information)
- Select Supply Pump Catalog Number (See table below)
- Select Return Pump Catalog Number (See table below)
Note: Up to two simplex or one duplex pumpset in any combination of: (1) supply pump, (1) return pump, (2) supply pumps or (2) return pumps
| Catalog Number | G.P.H. Oil #2 | Motor | ||
|---|---|---|---|---|
| P.S.I. | R.P.M. | H.P. | ||
| 11804 | 180 | 15 | 1725 | 1/3 |
| 11812 | 480 | 15 | 1725 | 1/3 |
| 11813 | 600 | 15 | 1725 | 1/3 |
| 11814 | 900 | 15 | 1725 | 3/4 |
| 11815 | 1200 | 15 | 1725 | 3/4 |
Note: All pumps are 115V 60Hz 1 phase